Elite Thermal Engineers Pvt. Ltd

 

 

• Type: Vertical, 3 pass, fully automatic, coil type thermal fluid heaters
• Capacities: 50000 kcal/hr to 1000000 kcal/hr
• Temperature: Up to 370 deg. C
• Suitable fuels: Light Oils / Heavy Oils / Gas / LDO / HSD / FO / LPG / Natural Gas / Biodiesel / Biogas
• Thermal efficiency: 88% ± 1% based on NCV of fuel
• External heat recovery unit: Optional

 

 

Technical Specifications:

• Type: Vertical, 3 pass, semi automatic, coil type thermal fluid heaters

• Capacities: 50000 kcal/hr to 2500000 kcal/hr

• Temperature: Up to 370 deg. C

• Suitable fuels:  Biomass pellets / biomass briquettes / biomass fuels / agro-waste briquettes / Coal / Bagasse / solid fuels

• Thermal efficiency: 78% with heat recovery unit

• External heat recovery unit: Combustion air pre-heater (Optional)

 

 

These are fully automatic, vertical, coil type thermal fluid heaters. Overall design is robust & reliable with very little maintenance requirement. The liberal furnace volume, higher radiation & convective heat transfer areas provided ensure that the units give excellent performance through complete combustion of fuels & achieving superior thermal efficiency.

 

• High thermal efficiency of about 88%
• High operating temperatures (up to 370 deg. C) with low system pressure
• Simple circuit, no blow downs, steam traps or condensate return systems necessary when compared with a steam system
• Fully automatic in operation, so no running attention required
• Thermal fluid coil MOC is Seamless Pipes (Sch. 40) confirming to ASTM A 106 Gr. B Standard
• Pre-heated combustion air is an integral part of the design giving superior thermal efficiency
• Liberal furnace volume, high radiant heat transfer area & high convective heat transfer area ensuring superior thermal efficiency & long life of equipment
• Robust & reliable equipment with minimum maintenance for burner, pump & controls
• Expansion & de-aeration tank design is such that it protects thermal fluid from oxidation & provides continuous de-aeration of thermal fluid thereby avoiding pump cavitation
• Three pass design ensuring adequate flue gas residence time which enables achieving superior thermal efficiency
• Fully automatic, oil, gas or dual fuel burners; ON – OFF or with modulating mechanism

These are semi automatic, vertical, coil type thermal fluid heaters with external furnace. Overall design is robust & reliable with very little maintenance requirement. The liberal furnace volume, higher radiation & convective heat transfer areas provided ensure that the units give excellent performance through complete combustion of fuels & achieving superior thermal efficiency.