Ionberg Technologies & Chemicals

DM Water Plant
Product Description

Deionizers (Demineralization Plant)
The Ionberg is a leading provider of deionization solutions. Our water deionizers are rugged, pre-engineered, pre-assembled, standardized units that minimize expensive installation and start-up costs. We have designed our Deionization systems to maximize the efficiency and repeatability of the unit during the service and regeneration modes
The Process of Deionization or Ion-exchange
In the context of water purification, ion-exchange is a rapid and reversible process in which impurity ions present in the water are replaced by ions released by an ion-exchange resin. The impurity ions are taken up by the resin, which must be periodically regenerated to restore it to the original ionic form. (An ion is an atom or group of atoms with an electric charge. Positively-charged ions are called cations and are usually metals; negatively-charged ions are called anions and are usually non-metals).
The following ions are widely found in raw waters:
Cations Anions
Calcium (Ca2+)   Chloride (Cl-)
Magnesium (Mg2+)   Bicarbonate (HCO3-)
Sodium (Na+)   Nitrate (NO3-)
Potassium (K+)   Carbonate (CO32-)
Iron (Fe2+)   Sulfate (SO42-)
Ion Exchange Resins
There are two basic types of resin - cation-exchange and anion-exchange resins. Cation exchange resins will release Hydrogen (H+) ions or other positively charged ions in exchange for impurity cations present in the water. Anion exchange resins will release hydroxyl (OH-) ions or other negatively charged ions in exchange for impurity anions present in the water.
The application of ion-exchange to water treatment and purification There are three ways in which ion-exchange technology can be used in water treatment and purification: first, cation-exchange resins alone can be employed to soften water by base exchange; secondly, anion-exchange resins alone can be used for organic scavenging or nitrate removal; and thirdly, combinations of cation-exchange and anion-exchange resins can be used to remove virtually all the ionic impurities present in the feedwater, a process known as deionization. Water deionizers purification process results in water of exceptionally high quality.
Deionization
For many laboratory and industrial applications, high-purity water which is essentially free from ionic contaminants is required. Water of this quality can be produced by deionization.The two most common types of deionization are:
Two-bed deionization
Mixed-bed deionization
Two-bed deionization
The two-bed deionizer consists of two vessels - one containing a cation-exchange resin in the hydrogen (H+) form and the other containing an anion resin in the hydroxyl (OH-) form. Water flows through the cation column, whereupon all the cations are exchanged for hydrogen ions. To keep the water electrically balanced, for every monovalent cation, e.g. Na+, one hydrogen ion is exchanged and for every divalent cation, e.g. Ca2+, or Mg2+, two hydrogen ions are exchanged. The same principle applies when considering anion-exchange. The decationised water then flows through the anion column. This time, all the negatively charged ions are exchanged for hydroxide ions which then combine with the hydrogen ions to form water (H2O).
Mixed-bed deionization
In mixed-bed deionizers the cation-exchange and anion-exchange resins are intimately mixed and contained in a single pressure vessel. The thorough mixture of cation-exchangers and anion-exchangers in a single column makes a mixed-bed deionizer equivalent to a lengthy series of two-bed plants. As a result, the water quality obtained from a mixed-bed deionizer is appreciably higher than that produced by a two-bed plant.
Although more efficient in purifying the incoming feedwater, mixed-bed plants are more sensitive to impurities in the water supply and involve a more complicated regeneration process. Mixed-bed
deionizers are normally used to ‘polish` the water to higher levels of purity after it has been initially treated by either a two-bed deionizer or a reverse osmosis unit. Electrode ionization EDI Electrode ionization Systems remove ions from aqueous streams, typically in conjunction with reverse osmosis (RO) and other purification devices. Our high-quality deionization modules continually produce ultrapure water up to 18.2MW/cm. EDI may be run continuously or intermittently
 

 

About Us:

Based in New Delhi, we are reaching out to clients situated all over India, Asia and worldwide with our well-coordinated supply-export network. Our unwavering pledge towards offering the best solutions for the clients has resulted in the acquisition of a wide clientele that also depends on us for the services of consulting for and maintaining the implements on a regular basis. Our expertise in this field is due to the support of a highly qualified team and the backbone of a state-of-the art infrastructure that lets us maintain the highest quality standards while innovate on a consistent basis.
Ionberg is capable of offering and handling a full range of contracting services, including conceptual design and process origination, project implementation, construction and installation/performance testing. Post contract assistance available includes operation-maintenance and servicing agreements, provision of spares, plant updating and refurbishing and plant operation.
We are a well established organization which offers broad spectrum of Water, Air Treatment, Green House Farming and Fire Safety Systems implements to its clients on the basis of their specifications. We have climbed up the ladder of success due to our unwavering commitment to quality. We endeavor to offer acceptable standards of premier quality Water and Air Treatment Systems with reasonable prices.
Each product is meticulously crafted and stringent checks are implemented at various stages to ensure a consistent quality of the finished products.
Infrastructure
Forming the core of our success, our infrastructure plays a pivotal role in manufacturing the Purification Implements. Operational with modern machinery and equipment, our units are able to meet the qualitative and qualitative targets set by us. Moreover, our warehousing unit enables the safe and organized storage of the implements till delivery.
Team
Our workforce is another essential asset of the company and the chief reason why we have managed to outpace competition even in the face of varied developments in the industry. Our experienced team works cohesively to bring forth their innovative ideas and blend them with the set requirements to offer the best solutions within the desired budget. Our team consists of the following members who are experts at their domain like:
Designing and production Engineers
Technicians
Quality control executives
Sale and marketing personnel
Management and administration personnel
Quality
Making no compromises, we assure that the highest standards are adhered to in every process. For this, we engage in continuous process monitoring where everything is scrutinized- right from the raw materials to the checking of the implements for their designing efficiency and performance.

Place Your Inquiry Here


Please enter your name, email and message to reply to ad author.

*All fields are required.
Name: Company Name:
Email: ContactNo:
Subject :    
Your Message: Note: This form can only be used for reply to ad author.
Sending unsolicited email advertisements is strictly prohibited!
Length: Characters Left