Airmech Systems
HVAC System
Product Description
Hepa Filters:
Frame: MS Powder coated, Aluminium anodised / St. Steel, Box / Flanged type.
Adhesive: Epoxy base adhesive used for leak proof joint between filtering media and filter casing.
Gasket: Sponge rubber / Polyurethane gasket provided for sealing of filter on its mounting frame.
Temperature & Humidity: Recommended for operating temperature: 120 degree centigrade. Recommended for operating humidity: 100% RH
Performance: Recommended for minimum operating efficiency of 99.97% down to particlesize of 0.3 microns by using DOP (Di-Octyl-Phthalate).
Product Range: Filters are available with air handling capacity in the range of 170 cubic meter / hr. (100 CFM) to 3400 cubic meter / hr. (2000 CFM)
Product Range: Filters are available with air handling capacity in the range of 170 cubic meter / hr. (100 CFM) to 3400 cubic meter / hr. (2000 CFM)
CONSTRUCTION:
Filter medium is 100% micro – glass fibre paper with high water repellency and temperature resistance. This medium is folded in to deep pleats and separated by machine pleated aluminium spacers, which ensures uniform flow through out the filtering areas, low resistance, uniform dust loading and high flow rate.
Minipleat Hepa filters class H10 to H14, Anodised aluminium profile frames, Plastic frames, endless foamed sealing Laminar flow protection grid. Microfine fibre-glass paper is pleated fully automatically to produce filter packs of different sizes. The individual folds are spaced by means of fused plastic threads and simultaneously lend the filter packs the required stability. Fields of
application up to max. 80 deg C and max. relative humidity 100%.
TESTING EQIPMENT FOR QUALITY CONTROL:
application up to max. 80 deg C and max. relative humidity 100%.
TESTING EQIPMENT FOR QUALITY CONTROL:
As per ISO14644-1, FEDERAL STD 209 E Standards we conduct following tests for filters:
Integrity Test.
Detecting Laminar or Non – Laminar Flow.
Periodic Validation of Clean Room.
The Equipment used in testing of filters are Aerosol Generators & Photometers.
Detecting Laminar or Non – Laminar Flow.
Periodic Validation of Clean Room.
The Equipment used in testing of filters are Aerosol Generators & Photometers.
Frame: GI Powder coated / Painted, Aluminium, St. Steel.
Adhesive: Epoxy base adhesive for leak proof joint between filtering media and filter casing.
Gasket: Felt /Natural Rubber /PE foam Gaskets as per customer choice for sealing the filters on mounting frames.
Adhesive: Epoxy base adhesive for leak proof joint between filtering media and filter casing.
Gasket: Felt /Natural Rubber /PE foam Gaskets as per customer choice for sealing the filters on mounting frames.
Temperature and Humidity: Recommended operating temperature: 75 deg Centigrade.
Cleaning: Washable by detergent / Water solution or by Air / Vaccum cleaner as per design.
Product Range: Filters are available with air handling capacity in the range of 170 cubic meter / hr. (100 CFM) to 4250 cubic meter / hr. (2000 CFM).
Cleaning: Washable by detergent / Water solution or by Air / Vaccum cleaner as per design.
Product Range: Filters are available with air handling capacity in the range of 170 cubic meter / hr. (100 CFM) to 4250 cubic meter / hr. (2000 CFM).
CONSTRUCTION:
Pleated HDPE mesh or special grade felt are used in Pre-filters, which have filtration capacity for 10 micron and larger size particles.
Non-woven filter fabric is used in fine or Microvee filters which have filtration capacity for 5 micron and larger particles, in both washable as well as non-washable type.
POCKET FILTERS:
Pocket filters: [F5 to F9 Ultrasonic – welded) Pocket filters are designed to handle large flow, high efficiency low resistance and high dust holding capacity, pocket filters are made in Synthetic or fibreglassmedia within metallic filter frame.
About Us:
Airmech Systems was established, with by importing the plant and machinary from AMS. Fully equipped with world class manufacturing facilities to Design, Manufacture and execute the Turnkey Projects on Clean Room Technology innovations (of all Classes), Clean Air Ventilation Systems, Air Conditioning & Refrigeration Application Systems in accord to the cGMP guidelines. Our competitive edge stems right from the location of our factory at Hyderabad, INDIA. Our winning streak started with delivery quality systems coupled with our expertise in adopting technical innovations and excellent project execution capabilities to meet industry specific requirements.
Our success lies in our core values and uncompromising commitment for quality in last two decades. It is because of these core values – we are a preferred vendor for all our clients, and rated as the best company to consult for future expansions and a trusted technology vendor for all HVAC projects. Our commitment is the stepping stone for business relations and each interaction leads to development of pragmatic and viable technology solution. Each project motivates us and every challenge inspires us to deliver success.
