B. S. Enterprise
Reverse Osmosis System
Product Description
Reverse Osmosis Plant:
Supplier & Manufacturer of Reverse Osmosis Plant. Our product range also comprises of Demineralisation Plant, Effluent Treatment Plant and Sewage Treatment Plant.
BS ENTERPRISE (with the Brand name of CONTOUR) is a Supplier & Manufacturer of Reverse Osmosis Treatment Plant & Reverse Osmosis Plant. Our product range also comprises of Mineral Water Plant and Effluent Treatment Plant.
The Reverse Osmosis Systems are engineered to economically produce high purity water by removal of dissolved minerals, bacteria, particles, and organic impurities.
SYSTEM FEATURES: All membrane systems are manufactured in a skid / frame design providing for ease of installation with minimum floorspace requirement. Constructed of welded structural carbon steel tubing, finished with corrosion resistant epoxy paint coating. Stainless steel fastener hardware is standard for corrosion resistance.
CARTRIDGE PRE-FILTRATION VESSEL: Pre-filtration of the membrane feed is standard on all systems. Filter housing is constructed of 304 stainless steel or per client specifications. Filter cartridges are pure polypropylene with a 5.0-micron nominal rating. SYSTEM PRESSURE PUMP Standard pressure pumps are constructed 316 stainless steel housing with a glass filled noryl and lexan impeller Pumps are equipped with TEFC motors wired for 230 / 460 VAC voltage and rated for full load, continuous duty.
MEMBRANE PRESSURE VESSELS: All systems feature membrane pressure vessels constructed of fiberglass reinforced polyester (FRP) with 316 stainless steel side-entry feed / concentrate ports. Standard vessels have a white polyurethane finish. ASME code stamping is available on all pressure vessels.
MEMBRANE ELEMENTS: Standard reverse osmosis (RO) membrane elements are high rejection, thin-film composite (TFC) type in a spiral-wound configuration. Membrane elements are tested at 99.5% average salt rejection. All membrane elements carry a three-year warranty against defects in quality and workmanship.
INSTRUMENTATION: All systems feature a complete instrumentation package for optimal performance monitoring. Each of the following instruments are completely panel-mounted and pre-wired: – Pre/Post cartridge filter pressure gauges – RO feed/interbank pressure gauges – Product/reject pressure gauges – RO inlet/pump discharge pressure switches – Product/reject electronic flow meters – Product conductivity monitor – System temperature indicator – Pump run hour meter
SYSTEM CONTROL: Operations of the system are automatically controlled through a comprehensive programmable logic controller (PLC) package housed in a NEMA-4 industrial electrical enclosure. The control system also includes a pre-wired motor starter, operator switches / pushbuttons, and status / alarm indicator lights. Standard systems include the following isolated alarm conditions:– Low inlet pressure– High pump discharge pressure– High RO product conductivity
SYSTEM FEATURES: All membrane systems are manufactured in a skid / frame design providing for ease of installation with minimum floorspace requirement. Constructed of welded structural carbon steel tubing, finished with corrosion resistant epoxy paint coating. Stainless steel fastener hardware is standard for corrosion resistance.
CARTRIDGE PRE-FILTRATION VESSEL: Pre-filtration of the membrane feed is standard on all systems. Filter housing is constructed of 304 stainless steel or per client specifications. Filter cartridges are pure polypropylene with a 5.0-micron nominal rating. SYSTEM PRESSURE PUMP Standard pressure pumps are constructed 316 stainless steel housing with a glass filled noryl and lexan impeller Pumps are equipped with TEFC motors wired for 230 / 460 VAC voltage and rated for full load, continuous duty.
MEMBRANE PRESSURE VESSELS: All systems feature membrane pressure vessels constructed of fiberglass reinforced polyester (FRP) with 316 stainless steel side-entry feed / concentrate ports. Standard vessels have a white polyurethane finish. ASME code stamping is available on all pressure vessels.
MEMBRANE ELEMENTS: Standard reverse osmosis (RO) membrane elements are high rejection, thin-film composite (TFC) type in a spiral-wound configuration. Membrane elements are tested at 99.5% average salt rejection. All membrane elements carry a three-year warranty against defects in quality and workmanship.
INSTRUMENTATION: All systems feature a complete instrumentation package for optimal performance monitoring. Each of the following instruments are completely panel-mounted and pre-wired: – Pre/Post cartridge filter pressure gauges – RO feed/interbank pressure gauges – Product/reject pressure gauges – RO inlet/pump discharge pressure switches – Product/reject electronic flow meters – Product conductivity monitor – System temperature indicator – Pump run hour meter
SYSTEM CONTROL: Operations of the system are automatically controlled through a comprehensive programmable logic controller (PLC) package housed in a NEMA-4 industrial electrical enclosure. The control system also includes a pre-wired motor starter, operator switches / pushbuttons, and status / alarm indicator lights. Standard systems include the following isolated alarm conditions:– Low inlet pressure– High pump discharge pressure– High RO product conductivity
SYSTEM PIPING AND VALVES: All membrane systems are completely pre-piped to the fullest extent and are installation ready. The following valves are provided as standard for accurate flow/pressure control and convenient operation:– Automatic inlet valve to prevent water flow through machine during shutdown– Pressure pump discharge throttle valve– RO reject/recirculation flow control valves– Automatic system flush valve for prevention of membrane fouling and scale formation– Pre/Post cartridge filter housing isolation valves– Inlet, product, and reject sampling valves– Isolation valves and blind ports for use with membrane cleaning systems
Profile:
B.S. Enterprise is a Manufacturer, Mechanical Engineer And Government Approved Contractor.The company has executed are variety of Machining & Fabrication assignments recent past. Some of the machining items include ID Fan Shaft, Cooling Tower items like Hubs Disc, Plates, Valves, Bearing Housing Assembly and Fan Shafts etc. Our company had also worked with very reputed company like Jessop & Co. Ltd. Paharpur Cooling Towers, Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited etc. Our company had also worked as supplier of Fire Bricks and Insulation Bricks. In the field of fabrication our company has manufactured ID Fan Impeller and is also fabricating moulds and structure of the Micro Tunnel Pipes under a private concern for KMDA. Our company has been enlisted to Eastern Railway, Chittaranjan Locomotive Works and South Eastern Railway. A list of our major field of activities is attached with a brief list of Major Contracts Executed.
|
Our Quality:
Quality being our forte, we leave no stone unturned in maintaining it in our range of industrial process equipment. Our aim is to provide products that conform to international quality standards, which will help us in growing our business activities. We strictly adhere to a set of quality management principles and ensure that all the manufacturing processes are stringently monitored. For this, we have advance testing facilities to examine the quality of our products right from the initial stage of procurement of raw material until the final stage of production. The well-defined parameters on which our cooling towers are checked and tested by our quality controllers include:
Our Infrastructure:
Our organization has built fully integrated state-of-the-art infrastructure facility, which assist in completing the ordered consignments within stipulated time frame. Our infrastructure is setup over a wide area and is segregated into:
Our manufacturing unit is spread across an ample area with an installed huge capacity with all the necessary equipment and machines that enable us to capitulate excellent results. Some of the machines installed at our manufacturing unit include:
Our Clientele:
Our focus towards delivering effective range of products that helped us in successfully meet the varied demands of our clients’ specific business requirements.
Some of Our Clients are as Follows :
|
