American Alloy Fabricators, Inc.
Stainless Steel Reactor (SSR)
Product Description
Jacketed Reactors:
- ASME code reactors
- Licensed up to 3000 psi
- Half-pipe, dimpled & conventional
- Agitated, mechanical & magnetic
American Alloy Fabricators, Inc. is an ASME Code Facility fabricating various styles of jacketed reactors. We will design, fabricate, inspect, and stamp per Section VIII, Division 1 of the ASME Code.
All of our reactors are fabricated from various grades of Stainless Steel, Hastelloy, Inconel, Monel, and other alloys.
American Alloy Fabricators has the ability to offer different levels of mechanical and electropolishing on the interior of your reactor. We can mechanically polish to an 8 Ra finish and electropolish to 4 Ra finish.
Half-Pipe Jacketed Reactors:
Half-pipe jacketing provides very good heat transfer by allowing high flow rates. It is best suited for high temperatures and pressure applications utilizing hot oil or other high temperature media. Our half-pipe is formed from a continuous coil and is "wrapped" around the vessel exterior in single or multiple zones to provide greater latitude for your process capabilities. American Alloy Fabricators, Inc. uses a 180 degree half-pipe configuration that minimizes pressure and increases fluid velocity.
Dimple Jacketed Reactors:
Dimple jacketing provides good heat transfer with low flow rates at lower pressures and temperatures. It is best used with steam for heating or chilled water for cooling. We roll the dimpled jacket to the vessel radius and then "plug weld" the individual dimples to the vessel. This allows for a secure fit.
Conventional Jacketed Reactors:
Also known as open jacket, conventional jacketing is a secondary external shell wrapped around the primary vessel to provide a space for heat transfer fluids. American Alloy Fabricators adds a spiral formed internal baffle to direct the heating media around the vessel from the inlet to the out.
Why Us?:
- American Alloy Fabricators specializes in the design and manufacture of custom, ASME-certified equipment for the pharmaceutical, biotechnology, chemical, and food processing industries.
- As a specialty fabricator, American Alloy is large enough to handle custom fabrication requests of any size, yet small enough to provide the personal service you deserve and the quick turnaround you require.
- American Alloy has built a solid reputation in the process industries as a company deeply committed to fabricating first-class products, delivered to you on time.
- Fully qualified to work with the various grades of stainless steel as well as Hastelloy, Inconel, Monel, Alloy 20 and AL6XN, American Alloy has the experience and expertise to transform your ideas into custom assemblies and apparatus that meet the specific needs of your process or plant.
- Welders certified to the ASME Code will perform all welding, using the appropriate procedures and equipment for your particular application. Pressure vessels will be designed, fabricated and stamped per Section VIII, Division I, of the ASME Code.
