Best Source for Chemical Suppliers, Surplus Materials & Pharma Services
FREE REGISTER | LOGIN
« Back
Home » New Equipments » Bulk Drug / Chemical Plant » Plate & Frame Filter (Filter Press)



Ravi Industries

Plate & Frame Filter (Filter Press)
Product Specifications

 Filter Press:

 

Model Dia. of Plates No. Of Plates Filtering Area m2 Cake holding Cap. (Ltrs) Flow Rate/Hrs Size of Pump Motor HP
RVSF - 8 8” 6 Plates
8 Plates		 0.216
0.278		 4.9
6.3		 600
700		 ½”
½”		 1 HP
1 HP
RVSF - 14 14” 8 Plates
10 Plates
12 Plates		 0.75
0.92 
1.04		 22.5
27.5
32.5		 1500
1800
2000		 1”  
1”  
1”		 2 HP
 2 HP 
2 HP
RVSF - 18 18” 10 Plates (S)
15 Plates (S)  
23 Plates (S) 
8 Plates (D)  
12 Plates (D)		 1.595 
2.30
3.48
1.305
1.885		 30
44
66
54
78		 3000
4500 
7000 
2500 
4000		 1 ½”  
1 ½”  
1 ½”  
1 ½”  
1 ½”		 3 HP
 3 HP 
 3 HP 
 3 HP 
3 HP
RVSF - 24 24” 12 Plates 
15 Plates 
18 Plates 
24 Plates		 3.3  
4.064  
4.8  
6.3		 105  
130  
153  
202		 5000
7500 
9000
12000		 2”  
2”  
2”  
2”		  5 HP 
 5 HP 
 5 HP 
5 HP
Note – In model 18 Filter Plates S = Sallow Type & D = Deep Type Plates

 

 

Model Dia. of Plates No. Of Plates Filtering Area m2 Cake holding Cap. (Ltrs) Flow Rate/Hrs Size of Pump Motor HP
RVZH - 8 8”   6 Plates
  8 Plates		 0.217
0.279		 4.9
6.3

600
800

 ½”  
½”		 1 HP
1 HP
RVZH - 14 14”   8 Plates
10 Plates 
12 Plates		 0.819
1.001 
1.183		 24.75 
30.25 
37.75		 1500 
1700 
1900		 1” 
1” 
1”		 2 HP 
2 HP 
2 HP
RVZH - 18 18” 10 Plates
12 Plates
15 Plates
24 Plates		 1.65 
1.95 
2.40 
3.75		 55
65
80 
125		 4000 
4600 
5500 
8200		 1 ½” 
1 ½”  
1 ½”  
1 ½”		 3 HP 
3 HP 
3 HP 
3 HP
RVZH - 24 24” 15 Plates
18 Plates 
24 Plates		 4.192 
5.035 
6.625		 144 
171 
225		 7000 
8500 
12500		 2” 
2” 
2”		 5 HP 
5 HP 
5 HP
RVZH - 33 33” 7 Plates       2” 5 HP
Product Description

Filter Press:

SPARKLER TYPE FILTER PRESS:
 
pharmaTECH  make HORIZONTAL FILTER PRESS  is a sparkler type and consist of S.S. Shell & Top cover using bolts to give pressure tight enclosure. The filter cartridge assembly inside the shell consists of several horizontally arranged disc type filter plates with perforated supporting screens, filter media & interlocking cups. The entire assembly complete with pump & piping connection is mounted on a suitable S.S. Trolley.

  STANDARD FLOW TYPE : The impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through opening on the sides of plates. As liquid pressure increases, the filter media (Paper/fabric) holds back the impurities & allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter most commonly used to obtain clear liquid. However if required, the cake formed between the plates can be obtained. Filtration is continued until its rate becomes very slow due to increased cake resistance.

SALIENT FEATURES :
  • Manufactured in S.S. 304 / S.S. 316 / S.S. 316L M.O.C• M.S / S.S. Jacket can be provided for hot filtration.
  • Gives crystal clear filtration by filtering particles up to 1 micron size.
  • Scavenger arrangement to remove all the liquid.
  • Cake can be dried either by compressed air or by insert gas, steam.
  • Filtration rates from 600 Ltrs/hr. to 30000 Ltrs/hr possible depending on the models.
  • Centrifugal / Gear / Lobe pumps can be offered, which can also be used for liquid transfer.
  • Sample collecting device & safety valve provided.
 
ZERO HOLD UP FILTER PRESS


pharmaTECH  -REVERSE FLOW ZERO HOLD UP TYPE : Here the direction of flow of liquid is exactly opposite to the flow in standard filter i.e. the impure liquid to be filtered enters the filter from the bottom into the center channel & goes to the top of each plate. The clear filtrate flows out from openings on side of plates to the shell & then to the outlet. This flow ensure almost 100% filtration of the liquid which is not so with the standard flow type.

SALIENT FEATURES :

  • Complete filtration of the batch without any hold up due to reverse flow of liquid hence large saving in time & cost.
  • Back wash facility can be provided for continuous operations.
  • No scavenger arrangement required.
  • The cake, filteraid & solids remain totally enclosed allowing filtration of toxic, hazardous & explosive liquids.
  • No contamination of internal surface of shell.
  • The top dome structure ensures fast & easy removal of cartridge assembly & cleaning of cake.
  • Other features same as standard flow type.

Place Your Inquiry Here


Please enter your name, email and message to reply to ad author.
*All fields are required.
Name: Company Name:
Email: ContactNo:
Subject :    
Your Message: Note: This form can only be used for reply to ad author.
Sending unsolicited email advertisements is strictly prohibited!
Length: Characters Left    

© Copyright 2025. All rights reserved.