Target Equipments

 

 

Target equipment Inter-cooler and after cooler Heat exchangers are utilized in several industries, especially in chemical plants and oil refineries, textile industries. The purpose of these heat exchangers is to transfer heat from machinery to the other, most often from a liquid to the other. The constant efficiency of the heat exchanger demands for regular inspection to assess the equipment integrity An inter cooler, also known as the charge air cooler is heat exchange device of the air to air or air to liquid kind that is used on supercharged and turbocharged internal combustion engines in order to maximize its volumetric efficiency by raising the charge density of intake air via almost isobaric.

 

 

The inter-coolers, sometimes called as the after coolers, come in varied shape, design and size based on the special requirements and performance of the supercharger system . Some of the usual spatial designs are

Each of these kinds could be cooled with an air to liquid system, air to air system , or its combination.

 

 

Our inter-cooler heat exchanger to successfully cool the air passing through the device, The inter-cooler needs to be cooled with the aid of some outside means.

Many of the inter-coolers undergo cooling like an engine radiator where the air flows above the inter-cooler fins outside, that in return cools the air present inside the inter-cooler. Thus it is known as air to air inter-coolers. Some of the inter-coolers that are water cooled rather than by air are known as air to water inter-coolers or after coolers.

 

Target Equipments design of the shell and tube heat exchanger is quite complex. The tubes used internally are deliberately of various shapes and design to obtain different outcomes. While a few of the tubes may be plain, others may come finned longitudinally or horizontally. Additionally, the tubes can also be of various materials and thermal conductivity. For instance, Target equipments can be designed from carbon steel, stainless steel, cupronickel, copper or brass.

 

 

Owing to the complex nature of the shell and tube heat exchangers, regular inspection of the equipment is necessary. This can help to assess the thickness of the tube walls that are prone to pitting, erosion and corrosion over time. The status of the whole bundle of tubes may be charted and assessed through a thorough inspection with the help of a device known as Internal Rotary Inspection System that functions via ultra tonic testing and also has a non-destructive nature

 

Oil cooler are classified in to two. One is air cooled - oil cooler then water –cooled oil cooler. Air cooled oil coolers are mostly used where water availability is scarce and expensive. Water-cooled oil cooler, maintenance and operating cost are usually low. The cooled water manifolds, charges oil and air coolers for usage on marine engines. These heat exchangers are suitable for power steering, bow thrusters ,deck machinery etc.

 

 

Oil Coolers are used for various applications involving cooling of Oils,

Target Equipment design of the tube heat exchanger is quite complex. The tubes used internally are deliberately of various shapes and design to obtain different outcomes. While a few of the tubes may be plain, others may come finned longitudinally or horizontally. Additionally, the tubes can also be of various materials and thermal conductivity. For instance, Target equipment can be designed from carbon steel, stainless steel, cupronickel, copper or brass.

 

 

Owing to the complex nature of the tube heat exchangers, regular inspection of the equipment is necessary. This can help to assess the thickness of the tube walls that are prone to pitting, erosion and corrosion over time. The status of the whole bundle of tubes may be charted and assessed through a thorough inspection with the help of a device known as Internal Rotary Inspection System that functions via ultra-tonic testing and also has a non-destructive nature.

 

 

We can manufacture a complete unit, replacement tube bundles (elements) or even a "parts kit"We replace existing tube bundle us per customer request we do size likeLengthupto 20,000 mm,Weight up to 20 M.T ,Pressure up to 300 Kg/cm3 Temperature up to 1000°C, Tube Plate Dia upto 4000 mm, Thickness up to 100 mm.

 

Fin Type Cooler are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, We are the professional Fin Type Coolerand air cooled condenser manufacturers, tubes in copper and fins are aluminium MOC we use 5/8’ or 3/8’and ½’ OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

 

 

Air Cooled Heat Exchangers - also known as Fin Fan Coolers, are heat transfer devices for rejecting heat from a hot process fluids such as refinery products or steam directly, to the surrounding atmosphere.

Target Fin Fan Coolers are basically that multiple rows of fin tubes with a fan to move lower temperature ambient air over the coils in order to cool the hotter fluid, just like a radiator in industrial an automobile. An industrial example is a unit large enough to reject the heat from a turbine exhaust steam condensation system.

 

Fin Type Coolers are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, We are the professional Fin Type Cooler and air cooled condenser manufacturers, tubes in copper and fins are aluminium MOC we use 5/8’ or 3/8’and ½’ OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

 

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a frame plate and a pressure plate and compressed by tightening bolts.

 

 

The plates are fitted with a gasket which seals the channel and directs the fluids into alternate channels. The number and size of the plates are determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The plates and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar both of which are fixed to the support columns. Connections are located in the frame cover, or if either or both fluids make more than a single pass within the unit, the frame and pressure plates. We are in the process of developing the Plate Heat Exchanger and would take up the manufacturing in the near future.

 

 

If you are unhappy with the original design of plate heat exchangers, send us the operating specifications and improvements required and we will offer a suitable replacement heatexchangers. We can also provide a shell and tube equivalent, if you would prefer to have a unit that is more easily repaired on our factory .

 

 

we have set up this organization with the sole objective of achieving a worldwide name for our organization both qualities wise and service wise. Our vision is to help the society and the nation at large with our technologically advanced products.

 

 

In order to make our dreams turn into a reality we technologically upgrade our production process and plan to reduce evaporation loss of water by 80% from the present situation.

 

 

TARGET EQUIPMENTS IS Established in 2001 reputed concern involved in manufacturing and exporting industrial Chilling plant and all types of Cooling Towers from 10TR to more than 1000TR it’s vary from costumer requirement and there application including FRP Cooling tower, Wooden Cooling tower, Dry Cooling tower, Fanless and Fillsless Cooling Towers.

Other than cooling tower We are also involved in fabricating most of HVAC products like industrial Chilling plant, water cooled chiller air cooled chillers, oil chiller ranging from 1TR to 250TR, other than that we manufacture all types of heat exchangers likeInter Cooler / After Cooler, Shell & Tube Heat Exchanger, Oil Cooler Heat Exchanger, Tube Bundle, Evaporator Coil Cooler, Fin Type Cooler, Plate Heat Exchanger, Marine Heat Exchanger, Our company also undertakes production ofEvaporator Cooling Systems, Humidification Plant, Water Treatment Chemical, Radiators.

We have most talented and 15 years of experienced engineers are with us Mr.Ananthan, Mr.Madan and Mr.Anbu. With their experience and knowledge under there guidance and supervision we are in one of the most preferred manufacturers and exporters of the present competitive markets all over the world. We measure our growth in the industry by the increasing list of our client base and through our exhaustive market reach, which is spread in almost all major centres of the world likeUnited Arab Emirates, Oman, Saudi Arabia Europe, Africa, UAE, South America and North America.

We are customer centric entity and hence always remain focused to meet and exceed the requirements of the customers in the best possible way. We try to leave no space for any sort of customer`s grievances in our overall work process. Besides being conscious towards maintaining international quality standards in our products we have also designed a feedback procedure that we receive from our customers and partners for bringing further improvement in our business performance.

 

 

The broad spectrum of products offered by us is cater to the major industrial sectors:

We are involved in the manufacture and supply of following products like