New Multifab Engineers Pvt Ltd
Gas Induction Reactor / Hydrogenator
Product Description
Gas Liquid Reactions – An Introduction:
Gas-liquid reactions are very common in Chemical Process Industry and contribute to more than 30% of all the chemical commercial reactions. There are several commercially important reactions where the gas phase is pure/explosive/toxic. In all these cases the gas phase is expensive and complete utilization of the solute gas is desired. When gas is introduced into the liquid, it has a certain residence time after which it leaves the liquid phase and is lost to atmosphere. To prevent this, there are often recovery devices attached in series with gas liquid contactors. However, this requires additional cost of installation of recovery devices and operating costs from recovering, pumping and compressing of recovered gas. The problem of retaining gas within the reactor has been achieved in the recently developed novel reactor design (which is patented). It uses the self induction principle for impellers. Energy efficient impeller designs have been developed for gas induction and gas dispersion. It is also efficient for gas-liquid-solid three phase reactions. The solid phase may be a catalyst or undergo a chemical reaction. The solids concentration may vary from 0.005% v/v (in the case of noble metal catalyst ) or 25% v/v (when solids undergo chemicals reaction). It is a proven design and a large number of reactors are in successful Commercial operation with a size range from 500 to 20,000 liters. This Gas Liquid Induction Reactor (Hydrogenator) is manufactured in India by New Multifab Engineers Private Limited and finds application in a variety of industrial applications.
Hydrogenation Reaction – An introduction:
Reactions in which hydrogen is simply added to a molecule are clubbed under the category of“Hydrogenation” Reactions. Hydrogenation is synonymous with reduction. Advantages of hydrogenation over conventional reduction reaction:
- Simpler and more useful procedure, with high yield
- Cleaner products
- Large volumes of solvents and/or solutions not required in processing step – particularly useful when process has to be used commercially
- Suitability to scale up – lab scale to commercial production
Catalytic hydrogenation is widely used in laboratory and industrial processes. Principal usage in laboratory is for chemical syntheses and also as a research tool. Industrial applications are varied: a short list of Clients to whom we have supplied Hydrogenators can be seen below. There are various limiting steps for the reaction, however there are some 8 kinetic resistances which have to be overcome for undertaking a hydrogenation reaction with high yield percentage.
Hydrogen side resistances
- Solution of Hydrogen
- Diffusion to Catalyst
- Chemisorption on Catalyst
Fluid side resistances
- Diffusion to Catalyst
- Chemisorption on Catalyst Other resistances
- Surface reaction on Catalyst
- Desorption of Products from Catalyst
- Diffusion of Products from Catalyst to Liquid phase
Of the above resistances, the chemical reaction kinetic resistances can be tackled by proper selection of catalyst and reaction conditions. However, it is often found that the rate of dissolution of hydrogen in the liquid phase is the rate limiting step. This is where the Hydrogenators manufactured by New Multifab Engineers Private Limited score over other similar process vessels. The key feature of these reactors is the efficiency at which gas – liquid mixing occurs. For this purpose, it is important that the unreacted gas from the gas space is drawn back into liquid. This difficult task has been achieved in the recently developed novel reactor design (which is patented). It uses the self induction principle for impellers. Energy efficient impeller designs have been developed for gas induction and gas dispersion. It is also efficient for gas-liquid-solid three phase reactions. The solid phase may be a catalyst or undergo a chemical reaction. The solids concentration may vary from 0.005% v/v ( in the case of noble metal catalyst ) or 25% v/v (when solids undergo chemicals reaction). It is a proven design and a large number of reactors are in successful Commercial operation with a size range from 500 to 20,000 liters.
We have manufactured Hydrogenators in various sizes. Click on the image to expand it:
Hydrogenation with Gas Induction Reactor – Stirred Vessel (Hydrogenator):
The benefits of gas induction reactor are as follows:
- Complete and Vigorous mixing of gas and liquid
- Uniform suspension of catalyst throughout reaction mixture
- Large gas-liquid contact area, typically 200m2 per m3 of operating volume
- Enhanced rate of mass transfer
- Minimal side reactions
- Reduced reaction time
- Higher heat transfer co-efficient
- Better batch to batch repeatability
- Heat transfer area not a constraint – Heat transfer area can be provided by internal coil as well as external heat exchanger
Hydrogenation with Hydrosyphon System:
To overcome limitation of accommodating heat transfer area in stirred vessel, the alternate design is providing an external heat exchanger with recirculation pump.
Our in-house developed hydrogenation system design is without recirculation pump based on Hydrosyphonprinciple. In this design, heat transfer area is provided out side the vessel as vertical shell & tube heat exchanger.
In this design Hydrosyphon can generate volumetric flow rates equivalent to large size pumps used for re-circulation providing advantage of elimination of rotating parts there by eliminating mechanical maintenance as well as hydrogen embrittlement of metal. Additionally, since our design does not require installation of pump, the power consumption of system is reduced. Hence, this is an eco-friendly solution.
Hydrosyphon system can be designed for high turn-down ratio, even by factor of ‘five’.
Our Services:
- Optimization of catalytic gas/liquid reactions
- Development of specific process
- Providing guidance for handling of all types of catalyst used for hydrogenation like noble metals, Pt/C, Pd/C, Rh-Ni etc.
- Providing guidance for reactivation and reuse of spent catalyst
- Providing guidance for regeneration and reuse of spent catalyst
- Feasibility study & site assessment
- Conceptual design
- Process hazard analysis
- Basic & detail engineering
- Process automation
- Project management
- Consulting for handling of by-products
- Process design for Effluent treatment
The above services can be offered as per requirements.
Safety:
Plant safety is our commitment. We undertake safety analysis during the design stage combining with monitoring of all operational sequences during operations including start-up and shut-down to avoid formation of any explosive mixture giving intrinsically safe plant.
Description:
We are established manufacturers, designers and fabricators of coded pressure vessels, chemicals process plants and equipments for the Chemical Process Industry with close to forty years of distinguished services to the Industry.
Our product range includes: Hydrogenators, Grease Kettles, Pressure Vessels, Heat Exchangers, Paint Machinery like Mixers, Blenders, High Speed Dispersers. Our client list includes major chemical industries in India such as Aarti Industries Limited, Asian Paints Limited, Gharda Chemicals and Pidilite Industries Limited, to name a few.
Services offered by us range from design and manufacture of pressure and non-pressure process equipment to standard, national and international codes, plant piping and maintenance, erection and commissioning of equipment.
We offer under a single roof the capability to engineer entire plants on turnkey basis. We also manufacture pilot plants for various laboratories and chemical industries and offer scale up design for successful pilot runs.
Our manufacturing facilities cater to most of the custom built requirements of the Industry in the complete range of materials of construction. The manufacturing unit is located in Rabale, Navi Mumbai.
Our product range includes: Hydrogenators, Grease Kettles, Pressure Vessels, Heat Exchangers, Paint Machinery like Mixers, Blenders, High Speed Dispersers. Our client list includes major chemical industries in India such as Aarti Industries Limited, Asian Paints Limited, Gharda Chemicals and Pidilite Industries Limited, to name a few.
Services offered by us range from design and manufacture of pressure and non-pressure process equipment to standard, national and international codes, plant piping and maintenance, erection and commissioning of equipment.
We offer under a single roof the capability to engineer entire plants on turnkey basis. We also manufacture pilot plants for various laboratories and chemical industries and offer scale up design for successful pilot runs.
Our manufacturing facilities cater to most of the custom built requirements of the Industry in the complete range of materials of construction. The manufacturing unit is located in Rabale, Navi Mumbai.
Our shop is approved by Chief Controller of Explosives Nagpur, for fabrication of Storage Tanks under Static and Mobile Pressure Vessel (SMPV) rules. We are well known as manufacturers of our major products such as Hydrogenators, Grease Kettles, Pressure vessels and Heat exchangers as well as Paint Machinery such as mixers, blenders and high speed dispersers.
