A.P.Pharma Systems
Fluid Bed Drier (FBD)
Product Description
R&D Model
Electrically heated, made out of stainless steel 304, but contact parts i.e. Product Container and Retarding Chamber, are made out of S.S.316 quality material, with 1 HP flame-proof blower motor, suitable to dry approximate 01 to 02 Kgs. of wet material at a time. ( 03 footerce design )
Fluid Bed Dryer
We are offering Fluid Bed Dryer equipment which is basically designed for 2 bar pressure shock. According to the requirement, solvent can be processes are controlled and monitored systems specified according to individual customer requirement. These are manufactured from S.S.316 grade stainless steel and are constructed to high GMP principles. For the reduction of any source of material entrapment, all welds are designed ground smooth to create crevice free profile both internally and externally. These dryers follow the principle of passing hot and clean air at a high velocity through the bed of moisture laden material to be dried, thus causing it to fluidized. When the current velocity of air current is maintained, the solid particles get suspended in the intense turbulence and are intermixed and exposed to the drying air current. It follows three stage filtration namely pre filtration, fine filtration and finally heap filtration. It has Steam heater battery with precise face and by pass arrangement for controlling the inlet air temperature. It holds a capacity of 10 Kgs to 500 Kgs.
Features :
- Air suction and discharge dampers provided to control the inlet and outlet air flow.
- Uniformity in drying and reduction in drying time
- Atmospheric inlet air is filtered by means of single/multi stage filters of 20 microns to prevent any fine dust to pass through the product
- An explosion safety flap of adequate capacity at the rear end of the dryer and an positive earthing point to prevent static charge in the machine are provided
- Digital temperature indicators cum controller is provided with the unit to indicate the inlet and outlet air temperature as well as to controller the present inlet air temperature
- Steam Coil made out of 1" dia. SS 304/316 finned tube & is designed to get pressure of around 3-4kg./cm^2 (working pressure 3 kg/cm^2)
- Timer provided to set the process time which will cut off the motor supply after pre-set time period
Cap: 30, 60, 120, 200, 250, 300 & 500 Kgs
About Us:
|
We have been working as Machinery & Plant for manufacturing unit for Pharmaceuticals Industries for Capsules Hard Soft Gelatin, Products since 2009.We have complete range of equipments required for each department for a small scale, medium and large units.
Soft Gelatin Plants from APPS have been developed in light with most recent insights form GMP. The custom built process plant comprising of Gelatin Storage Tanks, Medicament Vessels, Gelatin Cooker with complete Platform, Colour Mixer, Emulsifier and transferring the soft gelatin till the Encapsulating machine incorporates most modern techniques of plant design. Our range of product is enclosed for your ready references. These units are designed and suitably fabricated as per the fabricators codes ASME SECTION VIII DIV.I and BPEâ€2009 STD proper engineering practices generally to meet the standards of GMP AND cGMP requirements. We have a sufficient satisfied clients list to whom we have supplied our various range of equipment and servicing after sales regularly. We await your valued enquiry and assure you, our immediate response. Customer Satisfaction A.P. Pharma Systems is a vital Machinery of Soft Gelatin manufacturer. We are a client oriented group that is mounting with a customer preferred approach. We are dedicated to enhance customer’s approval by identifying their requirements.
Quality Assurance Our association is a major Machinery of Soft Gelatin manufacturer. Our organization is identified for our eminence assure. We are potential to achieve complete customer satisfaction which we attain by supplying their required product. Manufacturing Standards
We follow following International Standards, Codes and Norms for Sterile Liquid Processing System as a primary requirement of cGMP practice.
Mechanical Standards Vessels : ASME Sec. VIII Div.1, ASME BPE
Heat Exchangers : TEMA GMP Standards, USFDA, WHO, cGMP, EHEDG, FDA, ASME (BPE), A 3, ISPE Baselines, ISO-14159 European Nations Stds
NDT Standards : EN 1435, 895, 12517 & 571
Safety Standards : DS/EN 1050 Hygienic Design : B3 EN 1672- 2
Qualification Documents & Execution Standards ISPE Baselines Vol 5 Equipments Layout Standards ISPE Baselines Vol.3 PIPING STANDARDS Process : (BPE) / SA 270 Utility : ANSI B 31.3 Automation Standards GAMP5 & 21 CFR Part 11
Why Us?
|
|||||||||||||||||
|
|||||||||||||||||
