Shanta Flaker & Dryer Co. Pvt. Ltd
Drum Drier
Product Specifications
Product Description
Drum Dryer (Flaker):
Standard Size: Drum Dimensions
|
DIMENSIONS:(mm)
|
600
|
1000
|
1000
|
1000
|
1200
|
1250
|
1500
|
|
LENGTH:(mm)
|
1000
|
1250
|
2000
|
2500
|
2500
|
3000
|
3000
|
|
GROSSAREA:(mm)
|
2.00
|
4.00
|
6.00
|
8.00
|
10.00
|
12.00
|
14.5
|
Double Drum Dryer:
The double drum dryer is frequently used for products with a moderate viscosity. On the picture can be seen that the product is fed into the nip between the drums, the latter rotate in opposite directions to each other and a thin film of product passes through a gap between both drums. The thickness of this layer can be altered by changing the gap setting. Among the products processed on this type are milk, whey, yeast,
various kinds of glues, pigments and waste products.
Drum Dryer (Flaker):
Special Features
- Designed for trouble free operation
- Low Cost operation
- Continuous Process
- High thermal efficiency
- Minimum thermal degradation
- Accomplishment of flakeing in a single step
- Uniformly flaked product
The ‘SHANTA FLAKER & DRYER CO. PVT. LTD.’ offer a Flaker to convert Molten Chemical in to Solid flakes. This is achieved by forming a thin layer of molten product on the outside surface of a rotating drum and causing this to be solidified by spraying cooling water from inside surface of the drum. An adjustable scrapper continuously removes the solidified from the drum surface in flake forms. The material of construction for the drum can be Mild Steel,
Stainless Steel with / with Hard Chrome Plating, normally Monoblock for weldable materials. This construction ensure lifelong alignment, surface will be machined and ground finished. Drum Rotating on antifriction self aligning ball / roller bearing with standard Housing. Heavy duty drive arrangement for smooth, continuous and trouble free running. V-Pulley or Variable speed arrangement also provided for optimum performance. The Flaker Machine will be complete with 1440 RPM, 3 Phase, 415 volts, TEFC / ISD motor, with gear box, Tray, Hopper, M.S. hood, Belt Guard. Machine mounted on heavy base-plate for trouble free service. It’s optional features is Screw Conveyor, Flaker Breaker, Film thickens controllers, Complete enclosure for Hazardous application. Company also providing pilot unit which is available for, to take running trial on receipt of sample about 15 Kgs. Company carries out the test on it, to produce reliable information’s on outputs and for the scaling of purpose. Flaker used in Acetanilide, Fatty acids., Monochloro acetic acid, Nickel catalyst, Naphthalene, Resin, Waxes and so many other products.
Profile:
INTRODUCTION :-
We have pleasure in introducing ourselves as one of the leading manufacturer of CENTRIFUGE, FLUID BED DRYER, DRUM DRYER and FLAKER MACHINES. We have supplied the above machines all over India and Abroad for various types of industries and we have got the results of our machines to their full satisfaction as per the requirements. The company was started in September 15, 1978 with modest operations, today our products are widely accepted in the Chemical, Pharmaceutical, Agro Chemical and other industries. No wonder, we have fabricated and exported Flaker machines, Drum Dryer, Centrifuge as well as Fluid Bed Dryer to Fiji, Bangladesh, Sri Lanka, Iran etc.
THE PEOPLE :-
The backbone of the company, Mr. B. C. Doshi, who have proven the records of two decades experience in chemical flaker manufacturing. Experienced and dedicated staff looks after the designing, manufacturing and quality control, expert in their field of operation. Assisted by energetic staff.
THE RANGE :-
We have expertise in fabrication using different MOC like MS hard Chrome Platting, AISI 304, 316 & 316L, Mild Steel, etc. We have manufactured more than 250 Flaker machines up to 100 Kg to 2000 Kg. / Hr. capacity and working for Acetanilide, Alpha Napthylamine, PNCB, DNCB, PDBC, Dye intermediates, benzoyic Acid, Glue Material and similar products. We have manufactured GMP Fluid Bed Dryer up to 250 Kgs / per batch capacity worked on pneumatic system We have also fabricated Centrifuges machines as per consumer needs.
THE CUSTOMER SATISFACTION :-
Customer satisfaction is the foremost concern in our work culture. That is why a few of our products viz. Flaker machine and Drum Dryer are very popular among users. We have met stringent delivery schedules and accepted challenges of precision manufacturing. We have extended our services to small scale and
large-scale customers equally, and bagged repeat orders.
